Plasma Cutting Machine-SSR Applications|HUIMULTD

Plasma Cutting Machine

Plasma Cutting Machine banner


The plasma cutting machine generates high-calorie plasma gas through high-frequency arc ignition and heat-melts the metal workpiece to achieve the effect of cutting the workpiece. Since the molten metal will be discharged from the cutting surface during cutting, the plasma cutting machine has the advantages of smooth cutting surface, small thermal deformation, high cutting efficiency, and almost no heat-affected zone.

Plasma Cutting Machine


Plasma Cutting Machine imageIntroduction:
The plasma cutting machine is composed of contactors, transformers, bridge rectifiers, high-frequency arc ignition coils, solenoid valves, etc. Through the process of "pre ventilation-high frequency arc ignition-cutting- blowing out of arc", the metal workpiece will be cut.

Working principle:
1. Input voltage, current, time and other parameters through the panel.
2. The solenoid valve is energized to let in air.
3. Generate plasma gas and auxiliary gas through a high-frequency oscillator: the plasma gas is used to melt the metal, and the auxiliary gas is used to cool and blow off the molten metal.

The role of solid state relays:
1. Control the working status of the actuator.
2. Electrically isolate the control device from the actuator.
3. The bridge rectifier module converts three-phase alternating current into direct current.

Electric Welding Machine-SSR applications|HUIMULTD

Electric Welding Machine

Electric Welding Machine banner


The electric welding machine uses the thermal energy generated at the moment when the conductive welding wire is shorted to the metal to melt the welding wire into a liquid state to achieve the purpose of bonding two pieces of metal. Electric welding machine will produce a lot of harmful radiation and harmful gas when welding, so you need to wear face shield and mask when operating electric welding machine. Electric welding machine has the characteristics of small size, low cost, simple operation, etc., so it is widely used in manufacturing and construction fields.

Electric Welding Machine


Electric Welding Machine imageIntroduction:
The electric welding machine is composed of filter circuit, transformer, rectifier, inverter, etc. Through the process of "filtering-rectification-inverter-step-down-rectification", the power frequency voltage is converted into a stable DC voltage for welding.

Working principle:
1. After being processed by the filter circuit and the rectifier module, the power frequency voltage on the grid becomes a DC voltage.
2. After the alternating switching of high-power switching components, an intermediate frequency AC voltage will be generated.
3. After being processed by the step-down transformer, rectifier circuit, and reactance filtering, the intermediate frequency AC voltage becomes a DC voltage with a stable waveform.

The role of solid state relays:
1. Control the working status of the execution device.
2. The rectifier module can convert alternating current into direct current.

New Energy-SSR applications|HUIMULTD

New Energy

New Energy banner


New energy refers to other forms of energy besides fossil energy, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy.

Solar Energy


Solar Energy  imageIntroduction:
Solar cells use the photoelectric effect to convert light energy into electrical energy that can be stored.

working principle:
1. Solar panels collect light energy on its surface.
2. Through the photoelectric effect, light energy will be converted into electrical energy.
3. After a series of processing, the electric energy is stored in the battery.

The role of solid state relays:
1. Control the working status of the actuator through the charge controller.

Wind Energy


Wind Energy imageIntroduction:
Wind energy generators can convert wind energy into electrical energy and supply it to the power grid.

Working principle:
1. Natural wind drives the rotation of the wind wheel.
2. The speed increaser increases the speed to make the generator to generate electricity.

The role of solid state relays:
1. Control the working status of the actuator.

MGR-AH_3 Series Panel Mount Solid State Relay

  MGR-AH_3 Series Panel Mount Solid State Relay [All the information on this website is for reference only, and the actual product and the a...