How to purchase the real MGR/mager solid state relay

INTRODUCTION:

"We always believe that a manufacturer or company with excellent quality and service does not have any need to use the brand effect of other companies to promote and sell its products."
 According to customer feedback, they find some companies with confusing brand name and logos (such as meger, rriager, magar, megar, 111agar, which looks similar as mager) on e-commerce platforms, like ebay, alibaba, taobao, tmall. It has been verified that most of these companies were established after 2014, and sell products with the similar appearance and label to ours. Optimistically speaking, their existence also reflects that our products are widely recognized in the market. In order to avoid damage to our brand image, since 2017, we changed the logo from mager to MGR, and redesigned the labels and packaging of all products, and further improved the quality of our products.
Although we have been using positive legal measures to protect our customers from counterfeit and shoddy products, we also hope to help our customers to keep away with these phoneys by better understand our brand and products.

Through this article, you will learn about what is our brand history? What are the purchase channels for our solid state relays? What are the characteristics of our solid state relays? How to avoid the confusing product?

You can quickly navigate to the chapters you are interested in through the Directory below, and the Quick Navigator on the right side of the browser.

1. Introduction of Our Brand

Brand Name

●   Chinese full name: 乐清市美格尔电子电器有限公司;
●   Chinese abbreviation:美格尔
●   English full name：YUEQING MGR ELECTRONIC AND ELECTRICAL CO., LTD.
●   English abbreviation: MGR, or MAGER.
●   Other avaiLabel English name：YUEQING MEIGEER ELECTRONIC ELECTRIC CO., LTD.; YUEQING MEIGEER ELECTRONIC & ELECTRIC APPLIANCES CO., LTD.; YUEQING MEIGEER ELECTRONICS AND ELECTRIC CO., LTD.; YUEQING MEIGEER ELECTRONIC APPLIANCE CO., LTD.; YUEQING MEIGEER ELECTRON ELECTRICAL CO., LTD.; YUEQING MAGER ELECTRON ELECTRICAL CO., LTD.; YUEQING MGR ELECTRON ELECTRICAL CO., LTD.
According to Chinese law, English names can be changed and used at will, as long as they conform to the translation principles. Therefore, Chinese companies may have many English names in addition to the only Chinese name, and these English names vary according to the translation methods of different organizations (which also explains why we have so many English names). However, the English name cannot be officially registered in the industrial and commercial administration of China, nor is it regulated or restricted by Chinese law. Only the Chinese name enjoys all the rights of the company and the brand. Our Chinese name has never changed since it was officially registered in 2001, and we have not registered other branches. Therefore, when choosing a solid state relay, please look for our Chinese name: 乐清市美格尔电子电器有限公司 (hereinafter referred to as MGR, we, us or our). Although the production line of MGR is constantly expanding, its registered place and site have never left Yueqing City, China. (P.S. Yueqing City is a county-level city in Wenzhou City). If you meet other companies that contain meigeer, like Taiwan meigeer (twmgr), Shenzhen meigeer, Hongkong meigeer, Zhejiang meigeer, Shanghai meigeer, Wenzhou meigeer, Yueqing meigeer solid state relay, Yueqing meigeer relay, meigeer electricals (chmgr) and etc., we can tell you with certainty that they have no relationship with us.

Brand History

Since the 1990s, we have been engaged in the development and manufacture of electronic products and solid state relays.

In 2001, we officially registered YUEQING MEIGEER ELECTRONIC ELECTRIC CO., LTD. and started to provide solid state relays for companies across China.

In 2004, we used mager as an English trademark as products flowed into overseas markets through various foreign trade companies.

In 2008, we obtained ISO9001: 2000 quality management system certification. And our headquarters moved to the Beibaixiang Industrial Park.

In 2017, to avoid brand damage and better protect consumer rights, we used a more recognizable logo MGR.

In 2018, MGR cooperated deeply with HUIMU Trade to provide high quality MGR solid state relays and services to the world through HUIMU Industrial. Since then, MGR officially entered the overseas market.

In 2019, due to production needs, the MGR headquarters moved to the newly built MGR building, and MGR still plans to further expand the production line.

So far, we have sold millions of solid state relays. And we have been widely praised by users at home and abroad due to the high quality, the extremely low failure rate of our products. In the future, we will strive for excellence and work harder to help more customers.

2. How to distinguish our solid state relays

First, let us compare our products to those confusing products. Obviously, their logo is so similar to ours, even the design of the label is exactly the same, so that it is hard to distinguish from them at first sight. Actually, most of these companies were established between 2014-2018. Therefore, we are curious about what happened in 2014 and we would like to know what led to dozens of such companies appeared in a short period of time. In order to avoid damage to the brand image and protect the rights and interests of users, from 2017, we redesigned the packaging and labeling, and further upgraded the brand image, product quality and service.

The comparison of the old and new designs is shown below.

Old Package & Old Label: The Logo is "mager 美格尔";The Chinese Company Name is "美格尔电子电器有限公司"; The Origin is "MADE IN CHINA".

New Package & New Logo: The Logo is three simple and showy letters "MGR", no any Chinese in it；The Chinese Company Name is "乐清美格尔电子电器有限公司", which is our full company name; The English Company Name is "YUEQING MEIGEER ELECTRON ELECTRICAL CO., LTD."; The Origin is "MADE IN YUEQING".

On some cartons, we will print "始于2001" (which means "since 2001").

3. Where to buy our solid state relays

Official Channel

If you are in China, you can directly contact MGR.
●   Tel: 0086-0577-62875133
●   Email: mager518@yahoo.com.cn
●   Website: www.mgr.top, www.mager.cn
●   Add:
-No.306-308 Baixiang Avenue, Beibaixiang Industrial Park, Wenzhou, Zhejiang, China (MGR Factory)
-No.150 Malujiao East Road, Malujiao Village Wenzhou, Zhejiang, China (MGR Office Building)
●   Online Shop:
MGR has the only one Online Shop on the 1688.com, the site is:
https://yqmeigeer.1688.com
Except it, MGR does not have any online stores on any E-commerce platforms, such as eBay, amazon, etc.

MGR Building

If you are not in China, you can contact HUIMU Industrial.
●   Tel: 0086-0577-62698923
●   Email: sales@huimultd.com
●   Website:
-Main domain: www.huimultd.com
-Sub domains: electricals.huimultd.com, electronics.huimultd.com, instruments.huimultd.com
●   Add: No.266 Liujiang Road, Wenzhou, Zhejiang, China (HUIMU Headquarter)
●   Online Shop:
Although HUIMU Industrial has registered many online shops, it is only to prevent others from registering maliciously and is not used for actual operations.

HUIMU Industrial Headquarters

Third Party Channel

●   You can get our products through distributors. These excellent distributors can provide the same technical service and support as ours.
●   You can also get our products through retailers. Retailers will provide our services and support indirectly.
●   Our products will also enter the market through OEM and ODM, but these products are only subject to the supervision and management of the brand owners. We are only responsible to the brand owners, and you cannot get any help from us.

SPDT Solid State Relay - 3.MGR (HUIMULTD) SPDT SOLID STATE RELAY

§3. MGR (HUIMULTD) SPDT Solid State Relay

3.1 How to select MGR (HUIMULTD) SPDT Solid State Relay

1) MGR-1KB series Single Phase AC Solid State Relay 

Type meaning:
MGR - 1:[Single phase] - KB:[SPDT (Single Pole, Double Throw)] - 48:[Load voltage 480VAC] - 40:[40A]

Control Voltage:
3~32VDC (such as 3VDC, 5VDC, 9VDC, 12VDC, 18VDC, 24VDC, 32VDC or customized control voltage)
Control Current:
Ultra low input current, ≤20mA
Load Voltage:
Single phase 24~480VAC (such as 24VAC, 48VAC, 110VAC, 230VAC, 380VAC, 480VAC or customized load voltage)
Load Current:
10A, 15A, 20A, 25A, 30A, 40A
Dimensions & Mounting:
57.4mm*44.8mm*28mm; Panel mount solid state relay with transport cover,metal base and screw terminals

2) MGR-1AKB series Single Phase AC Solid State Relay 

Type meaning:
MGR - 1:[Single phase] - A:[Control voltage 85-265VAC] - KB:[SPDT (Single Pole, Double Throw)] - 48:[Load voltage 480VAC] - 40:[40A]

Control Voltage:
85~265VAC (such as 100VAC, 110VAC/120VAC, 200VAC, 220VAC/230VAC, 240VAC or customized control voltage)
Control Current:
Ultra low input current, ≤10mA
Load Voltage:
Single phase 24~480VAC (such as 24VAC, 48VAC, 110VAC, 230VAC, 380VAC, 480VAC or customized load voltage)
Load Current:
10A, 15A, 20A, 25A, 30A, 40A
Dimensions & Mounting:
57.4mm*44.8mm*28mm; Panel mount solid state relay with transport cover,metal base and screw terminals

3.2 Why choose MGR (HUIMULTD)

HUIMU Industrial specializes in providing industrial control products (such as Solid State Relays) and solutions, and consists of two companies: HUIMU Trade and MGR.

MGR is a modern high-tech company integrating R&D, manufacture, sales and service of solid state relays. Since its establishment, MGR has always been adhering to the purpose of " Innovation, Quality, Integrity", and the mission of "Manufacturing the High-Quality Industrial Control Products". For more than 20 years, MGR has continuously innovated and applied for a number of patents, and the MGR brand Solid State Relays are well sold at home and abroad.

MGR's full range of MGR solid state relays are available in a wide range of models and specifications, for example: single/three-phase solid state relay, voltage regulator, power regulator, DC motor governor, three-phase phase-shifting trigger (module), power electronic components (module), and so on. The wide product lines meet the needs of solid state relays in different industries; the high quality makes MGR solid state relays popular in all provinces and cities in China, as well as in Southeast Asia, the Middle East, Europe and the United States, and gains the trust of customers.

The Focus and Passion of technology, has enabled MGR to gather a number of senior engineers and professional technicians. With the joint efforts of the technical team, MGR 's research and development capabilities continue to improve and follow the times, and make it easy to design and develop OEM & ODM customized products according to customer needs.

The Perseverance and Pursuit in quality, make MGR demand itself with international standards. Each operation process strictly follows the IS09001 standard, each part is rigorously tested by superb testing equipment, and the experienced high-quality staff with team spirit is in harmony with advanced production equipment, and the purpose is only for manufacturing high-quality solid state relays.

SPDT Solid State Relay - 2.WHAT IS SPDT SOLID STATE RELAY

§2. What is SPDT Solid State Relay

All the switch component (MOSFET, SCR, TRIAC, IGBT, etc.) in the solid state relay only acts as a SPST switch, and there is no single component in the solid state relay that has the SPDT function. Besides, the opto-coupler (with optoelectronic isolation feature) is used in the normal solid state relay as the signal transmission component, so the input control circuit of the SSR switch is electrical insulated to its output circuit. Therefore, if an SPDT solid state relay is required, we can only modify the SPST SSR switch by using a special circuit. And because of the electronic switch components, SPDT solid state relays is more efficient and consumes lower power than SPDT mechanical relays.

The basics of the SPDT SSR switch structure is a little different to the SPDT switch structure:
"Pole" – "Throw (Throw A and Throw B)":
"General-Purpose Push-Pull Outputs (GPout) ^①" – "Diodes and Photodiodes";
"Photodiode array ^②" – "N-channel enhancement mode MOSFET and N-channel depletion mode MOSFET"
Open: If the pole is disconnected to one throw, the state of this throw is called open state or open.
Close: If the pole is connected to one throw, the state of this throw is called close state or close.
NO (Normally Open): If the throw circuit is disconnected to the pole by default (when the pole is not energized or charged or the voltage level on the pole is zero), this throw circuit will be called the normally open circuit (NO circuit, N/O circuit), and the solid state relay switch will be called normally open SSR switch (NO SSR switch, N/O SSR switch).
NC (Normally Close): If the throw circuit is connected to the pole by default (when the pole is not energized or charged or the voltage level on the pole is zero), this throw circuit will be called the normally closed circuit (NC circuit, N/C circuit), and the solid state relay switch will be called normally closed SSR switch (NC SSR switch, N/C SSR switch).
① Push-Pull Outputs: The push-pull outputs are usually used for two triodes which are controlled by two complementary signals (that is, if one transistor is turned on, the other transistor must be turned off). And the push-pull outputs can output the high voltage level and low voltage level, both of which have the capability to drive the switch components.
② Photodiode array: the stack of photodiodes is used to drive a pair of MOSFETs or an IGBT.

2.1 How does SPDT Solid State Relay work

According to “Pole – Throw”, SPDT solid state relays can be divided into two types: Push-Pull type, and Photodiode-Array type.

1) Push-Pull Type SPDT Solid State Relay

The common circuit diagram of the push-pull SPDT SSR relay as shown below (as shown in Figure 7). The push-pull type SPDT SSR switch consists of two LEDs (D1, D2), and two Photo-TRIACs (TRIAC1, TRIAC2). D1 and TRIAC1 form the CIRCUIT1, and D2 and TRIAC2 form the CIRCUIT2. The push-pull signal (GPout) is generated in the input control terminal of the SPDT SSR, and LOAD1 and LOAD2 is connected to the two output terminals of the SPDT SSR relay.

According to the GPout signal, there will be three status of the SPDT solid state relay:

1. When a low voltage level is generated in the input terminal, D2 will be turned off, and D1 will be turned on, and TRIAC1 will conduct, then the CIRCUIT1 will be closed, finally the LOAD1 will be switched on.
2. When a high voltage level is generated in the input terminal, D1 will be turned off, and D2 will be turned on, and TRIAC2 will conduct, then the CIRCUIT2 will be closed, finally the LOAD2 will be switched on.
3. If there is no signal on the input terminal, D1 and D2 will be turned off, and CIRCUIT1 and CIRCUIT2 will not be switched on.

Note: Since the GPout outputs and the operating voltage of LED needs to meet certain limits and requirements, the application of Push-pull type SPDT solid state relay is not very extensive.

2) Photodiode-Array Type SPDT Solid State Relay

Following shows the common circuit diagram of the photodiode-array SPDT SSR relay (as shown in Figure 8), which can work in DC power supply and AC power supply. The photodiode-array type SPDT SSR switch consists of one photodiode-array (D1), and four N-MOSFETs (MOS1 and MOS2 are enhancement mode N-MOSFETs^③; MOS3 and MOS4 are depletion mode N-MOSFETs^④). MOS1 and MOS2 form the CIRCUIT1, and MOS3 and MOS4 form the CIRCUIT2. There are 5 output terminals, Port1, Port2, Port3, Port4, Port5, and the Port1 is the common terminal. LOAD1 and LOAD2 is connected to the SPDT switch.

③ The enhancement mode N-channel MOSFET will turn on when Vgs>Vgs(th)^⑤, otherwise it will not conduct.
④ The depletion mode N-channel MOSFET will turn on at zero input, and turn off when its Vgs is negative.
⑤ Vgs is the voltage from gate to source; Vgs(th) is the threshold voltage from gate to source.

1. DC Power Supply
When the photodiode-array SPDT SSR relay is working in a DC power supply, the LOAD1 should be connected to the PORT2, and the LOAD2 should be connected to the PORT4, so the MOS2 and MOS4 will not work.

When photodiode array is disabled, the gate voltage of the MOS1 is below its threshold voltage and won't turn on, so the LOAD1 is switched off; the gate voltage of the MOS3 is zero input and will conduct, so the LOAD2 will be switched on (as shown in Figure 9).

When photodiode array is enabled, the gate voltage of the MOS1 is above its threshold voltage and be turned on, so the LOAD1 will be switched on; the gate voltage of the MOS3 is negative and will not conduct, so the LOAD2 will be switched off (as shown in Figure 10).

2. AC Power Supply
When the photodiode-array SPDT SSR relay is working in an AC power supply, the LOAD1 should be connected to the PORT3, and the LOAD2 should be connected to the PORT5.

When photodiode array is disabled, the gate voltage of the MOS1 and MOS2 is below its threshold voltage and won't turn on, so the LOAD1 is switched off; the gate voltage of the MOS3 and MOS4 is zero input and will conduct, so the LOAD2 will be switched on (as shown in Figure 11).

When photodiode array is enabled, the gate voltage of the MOS1 and MOS2 is above its threshold voltage and be turned on, so the LOAD1 will be switched on; the gate voltage of the MOS3 and MOS4 is negative and will not conduct, so the LOAD2 will be switched off (as shown in Figure 12).

Note: Because of the features of N channel enhancement MOSFETs and N channel depletion MOSFETs, this kind of solid state relays are widely used to control the DC load circuit and the AC load circuit.

2.2 What is SPDT solid state relay used for

Solar Battery Charger

SPDT solid state relays are typically used in solar power charger systems (such as portable solar charger) to control the solar cell charging equipment. The working state (charging state and power state) of the solar cells is switched much frequently, so the SPDT mechanical relays cannot meet this requirement, but the SPDT SSRs can.

Soft Starter System

When the electronic/electrical systems (and their subsystems) works normally, the switching frequency of its soft start state and stop state is very high. Therefore, the SPDT make-before-break switch need to be equipped to prevent overvoltage when switching.

Remote Control Device / Radio Transmitter

If the remote control device wants to control multiple objects, it needs to change the transmitted signal; if the communication tower wants to switch the recipient, it needs to change the transmission signal. This kind of equipment require strict operating frequency and operation accuracy, and SPDT solid state relays can meet these requirements in most cases.

Satellite Heater

In the space environment, there are high requirements (weight, anti-interference ability, adaptability, and so on) to every device. The SPDT solid-state relay (with lots of advantages, like small weight, high performance, long service life, low power consumption, low EMR and etc.) meet these requirements, and is much better than the SPDT electromechanical relay (simple structure, but high weight, poor anti-interference ability and cannot adapt to complicated situations due to overweight).

SPDT Solid State Relay - 1.WHAT IS SPDT SWITCH

§1. What is SPDT Switch

SPDT (Single Pole Double Throw) is a special switch structure. Different with the normal SPST (Single Pole Single Throw) switches, SPDT switches control the working status of two devices, and these two devices work in opposite status. For example, a SPDT switch is connected to Device A and Device B, the Device A will be on status and the Device B is shut down if the SPDT switch is switched off; conversely, if the SPDT switch is switched on, the Device A will be off status and the Device B will be turned on. Therefore, we can know that no matter what state the SPDT switch works on, only one device will be turned on.

1.1 What is the Structure of SPDT Switch

The basics of the SPDT switch structure:
Pole: The pole is the controller inside the switch. We usually use single pole, double pole, or etc. to show how many separate circuits that controlled by the switch.
Throw: The throw means the circuit that will be controlled by the pole. We usually use single throw, double throw, or etc. to show how many circuits will be controlled by one Pole.
Open: If the pole is disconnected to one throw, the state of this throw is called open state or open.
Close: If the pole is connected to one throw, the state of this throw is called close state or close.
NO (Normally Open): If the throw circuit is disconnected to the pole by default (when the pole is not subject to any external forces), this throw circuit will be called the normally open circuit (NO circuit, N/O circuit), and the switch will be called normally open switch (NO switch, N/O switch).
NC (Normally Close): If the throw circuit is connected to the pole by default (when the pole is not subject to any external forces), this throw circuit will be called the normally closed circuit (NC circuit, N/C circuit), and the switch will be called normally closed switch (NC switch, N/C switch).

SPDT switch is a five terminal switch device — two input terminals, and three output terminals (two terminals connect to the load, and one terminal connect to the common terminal). And if one of SPDT switch output terminals does not connect to any circuit (which means only one control circuit and one output circuit are connected to the SPDT switch), the SPDT switch functions as a SPST switch.

Generally, the SPDT switch will be more suitable and efficient for some special applications than what two normal SPST switches (which need two control circuits) can do, like switching two different power supplies in opposite status, or activating two circuits with different functions in opposite status.

1.2 How does SPDT Switch work

According to the way of operating, the single pole double throw switch can be divided into BBM type SPDT switch (break-before-make) and MBB type SPDT switch (make-before-break).

1) BBM (Break Before Make) SPDT Switch

By default, the pole of the BBM SPDT switch is connected to NC throw circuit and disconnected from the NO throw circuit. When the break-before-make switch is switched, it will first disconnect to the NC circuit, and then connect to the NO circuit.

2) MBB (Make Before Break) SPDT Switch

By default, the pole of the MBB SPDT switch is connected to NC throw circuit and disconnected from the NO throw circuit. When the make-before-break switch is switched, it will first connect to the NO circuit, and then disconnect to the NC circuit.