How to wire the MGR solid state relay? - 4.How to wire PCB Solid State Relay

§4. How to wire PCB Solid State Relay

-PCB Solid State Relay Wiring Diagram

4.1 PCB DC to DC Solid State Relay (SIP)

GJ-FA-L Series 

The SIP PCB mounting DC to DC solid state relay uses a DC signal to control the DC load. The input circuit of PCB mounting DC-DC solid state switch is connected to the DC control device. The output circuit is connected to the DC power supply and the load. The solid state relay uses the SIP 4-pin package and standard British PCB mounting dimensions.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

4.2 PCB DC to DC Solid State Relay (DIP)

JGX_FA Series 

The DIP PCB mounting DC to DC solid state relay uses a DC signal to control the DC load. The input circuit of PCB mounting DC-DC solid state switch is connected to the DC control device. The output circuit is connected to the DC power supply and the load. The solid state relay uses the DIP 4-pin package and standard British PCB mounting dimensions.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

JGX_FAS Series 

The circuit wiring diagram of the Heat Sink Type DIP PCB Mounting DC to DC Solid State Relay is the same as the DIP dc to dc solid state relay.

4.3 PCB DC to AC Solid State Relay (SIP)

GJ_L Series 

The SIP PCB mounting DC to AC solid state relay uses a DC signal to control the single phase AC load. The input circuit of PCB mounting DC-AC solid state switch is connected to the DC control device. The output circuit is connected to the single phase AC power supply and the load. The solid state relay uses the SIP 4-pin package and standard British PCB mounting dimensions.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

4.4 PCB DC to AC Solid State Relay (DIP)

JGX_F Series 

The DIP PCB mounting DC to AC solid state relay uses a DC signal to control the single phase AC load. The input circuit of PCB mounting DC-AC solid state switch is connected to the DC control device. The output circuit is connected to the single phase AC power supply and the load. The solid state relay uses the DIP 4-pin package and standard British PCB mounting dimensions.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

JGX_FS Series 

The circuit wiring diagram of the Heat Sink Type DIP PCB Mounting DC to AC Solid State Relay is the same as the DIP dc to ac solid state relay.

How to wire the MGR solid state relay? - 3.How to wire Industrial AC Solid State Relay

§3. How to wire Industrial AC Solid State Relay

-Industrial AC Solid State Relay Wiring Diagram

3.1 Industrial Single Phase DC to AC Solid State Relay

MGR-H Series 

The standard type industrial DC to AC solid state relay is a four-terminal electronic device that uses a DC signal to control the single phase AC load. The input circuit of the industrial DC-AC solid state switch is connected to the DC control device. And LED indicators shows the working status. The output circuit is connected to a single phase AC load. The industrial single phase dc to ac SSR is installed in the application device by the standard mounting flange.

MGR-H(P) Series 

The circuit wiring diagram of the industrial random conduction DC to AC solid state relay (or industrial random fire dc to ac ssr) is the same as the zero-crossing dc to ac solid state relay.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

3.2 Industrial Single Phase AC to AC Solid State Relay

MGR-AH Series 

The standard type industrial AC to AC solid state relay is a four-terminal electronic device that uses a single phase AC signal to control the single phase AC load. The input circuit of the industrial AC-AC solid state switch is connected to the single phase AC control device. And LED indicators shows the working status. The output circuit is connected to a single phase AC load. The industrial single phase ac to ac SSR is installed in the application device by the standard mounting flange.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

3.3 Industrial Single Phase DC to AC Solid State Relay (High Current Type)

MGR-H Series 

The large current type industrial DC to AC solid state relay uses a DC signal to control the single phase AC load. The input circuit is connected to the DC control device. The output circuit is connected to the single phase AC load through Port1 and Port3.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

3.4 Industrial Single Phase AC to AC Solid State Relay (High Current Type)

MGR-AH Series 

The large current type industrial AC to AC solid state relay uses a single phase AC signal to control the single phase AC load. The input circuit is connected to the single phase AC control device. The output circuit is connected to the single phase AC load through Port1 and Port3.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

3.5 Industrial Three Phase DC to AC Combined Solid State Relay

MGR-H_3 Series 

The combined type three phase industrial DC to AC solid state relay consists of three standard type DC to AC industrial solid state switches, a 220VAC fan, an 85°C temperature control switch and a heat sink. This type of three phase industrial SSR uses a DC signal to control the three phase AC load. The input circuit is connected to the DC control device. The output circuit is connected to the three phase AC power supply and load.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

3.6 Industrial Three Phase AC to AC Combined Solid State Relay

MGR-AH_3 Series 

The combined type three phase industrial AC to AC solid state relay consists of three standard type AC to AC industrial solid state switches, a 220VAC fan, an 85°C temperature control switch and a heat sink. This type of three phase industrial SSR uses a single phase AC signal to control the three phase AC load. The input circuit is connected to the single phase AC control device. The output circuit is connected to the three phase AC power supply and load.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

How to wire the MGR solid state relay? - 2.How to Wire AC Solid State Relay

§2. How to Wire AC Solid State Relay

-AC Solid State Relay Wiring Diagram

2.1 Single Phase DC to AC Solid State Relay

MGR-1D Series 

The single phase DC to AC solid state relay is a four-terminal electronic device that uses a DC signal to control the single phase AC load. Port1 and Port2 of DC-AC solid state switch are connected to the load and the single phase AC power supply. Port3 and Port4 are connected to the DC control device.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

MGR-1D(P) Series 

The circuit wiring diagram of the Random Conduction DC to AC Solid State Relay (or random fire dc to ac ssr) is the same as the zero-crossing dc to ac solid state relay.

MGR-1X Series 

The circuit wiring diagram of the MINI DC to AC Solid State Relay is the same as the zero-crossing dc to ac solid state relay.

2.2 Single Phase AC to AC Solid State Relay

MGR-1A Series 

The single phase AC to AC solid state relay is a four-terminal electronic device that uses a single phase AC signal to control the single phase AC load. Port1 and Port2 of AC-AC solid state switch are connected to the load and the single phase AC power supply. Port3 and Port4 are connected to the single phase AC control device.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

2.3 Three Phase DC to AC Solid State Relay

MGR-3032 Series 

The three phase DC to AC solid state relay is an eight-terminal electronic device that uses a DC signal to control three phase AC load. A1, B1, and C1 of three phase DC-AC solid state switch are connected to the three phase AC power supply; A2, B2, and C2 are connected to the Δ load (delta load) or Y load. "+" and "-" are connected to DC control device.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc. ) of the solid state relay meet the requirements of the application.

MGR-3X_D Series 

The circuit wiring diagram of the Compact Three Phase AC to AC Solid State Relay is the same as the zero-crossing three phase ac to ac solid state relay.

2.4 Three Phase AC to AC Solid State Relay

MGR-3A Series 

The three phase AC to AC solid state relay is an eight-terminal electronic device that uses a single phase AC signal to control three phase AC load. A1, B1, C1 of three phase AC-AC solid state switch are connected to the three phase AC power supply; A2, B2, and C2 are connected to the Δ load (delta load) or Y load. The input circuit of the three phase ac to ac SSR are connected to single phase AC control device.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

MGR-3X_A Series 

The circuit wiring diagram of the Compact Three Phase AC to AC Solid State Relay is the same as the zero-crossing three phase ac to ac solid state relay.

How to wire the MGR solid state relay? - 1.How to Wire DC Solid State Relay

§1. How to Wire DC Solid State Relay

-DC Solid State Relay Wiring Diagram

1.1 DC to DC Solid State Relay

MGR-1DD Series 

The DC to DC solid state relay is a four-terminal electronic device that uses a DC signal to control the DC load. Port1 and Port2 of DC-DC solid state switch are connected to the load and the DC power supply. Port3 and Port4 are connected to the DC control device.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

MGR-DD Series 

The circuit wiring diagram of the MINI DC to DC Solid State Relay is the same as the zero-crossing dc to dc solid state relay.

1.2 AC to DC Solid State Relay

MGR-1AD Series 

The AC to DC solid state relay is a four-terminal electronic device that uses an AC signal to control the DC load. Port1 and Port2 of AC-DC solid state switch are connected to the load and the DC power supply. Port3 and Port4 are connected to the AC control device.

Note: Before installation and use, please confirm whether the specifications (such as input current, input voltage, output current, output voltage and etc.) of the solid state relay meet the requirements of the application.

Arc - Short essay

An electric arc is a gas discharge phenomenon in which an electric current is generated by a momentary spark generated by some insulating medium such as air.

Spark - Short essay

Spark is a kind of particulate matter with energy and heat generated by a large amount of electric energy when the contacts of mechanical relays strike together.

Moisture Resistance - Short essay

Moisture Resistance also known as damp proofing ability, is a type of moisture control to prevent the intrusion of humid air (water vapor) into the relay, causing corrosion of mechanical components, short-circuiting of electronic components and etc. Since the solid state relay uses a well-sealed casing, it has better moisture resistance than mechanical relays.

Insulation Material - Short essay

Insulation Material is the material for electric insulation use in the electrical and electronic field.