Autoclave-ssr applications|HUIMULTD

Autoclave

Autoclave banner


The autoclave can create an environment of specified temperature, air pressure and humidity, and can be used as a sterilization device or an experimental device. Because of its excellent performance and reasonable price, it is commonly used in dental, medical, veterinary and laboratory equipment.

Autoclave

Autoclave imageIntroduction:
The autoclave uses atmospheric pressure as the power source to ensure that the contents of the autoclave will not be exposed to any impurities except for the medium gas. If used as an experimental device, hydrogen is usually selected as the medium gas; if used as a sterilization device, usually water vapor is used as the medium gas. The autoclave consists of a reaction vessel, agitator, transmission system, cooling device, safety device, heating furnace, etc.

Working principle:
1. Feed in hydrogen (or water vapor), drain the air in the autoclave, and close the air inlet and outlet.
2. The controller controls the heater to heat the kettle body to the specified temperature.
3. Control the air pressure in the autoclave through the exhaust valve.
4. Maintain the specified air pressure and temperature to make the materials in the autoclave fully react (or achieve the sterilization effect).

The role of solid state relays:
1. Undertake the role of low pressure control high pressure in the control system.
2. Control the operating status of heaters, autoclaves, water pumps, and dry pumps.
By Date：
Tag： ,

Ultrasonic Oscillator-SSR applications|HUIMULTD

Ultrasonic Oscillator

Ultrasonic Oscillator banner


When ultrasonic waves propagate in liquids, millions of tiny cavitation bubbles are generated every second. These bubbles generate powerful impact and negative pressure suction, which can peel off dirt and kill bacteria and viruses. Ultrasonic oscillators use high-frequency sound waves to produce vibrations to clean and disinfect medical appliances or laboratory appliances. It can also stir solutions (alcohol, medicine, etc.) to accelerate chemical reactions.

Ultrasonic Oscillator

Ultrasonic Oscillator imageIntroduction:
The ultrasonic vibrator consists of a vibration plate, an ultrasonic generator and so on.

Working principle:
1. Place the object in the ultrasonic vibrator.
2. Turn on the power, and set the time and other parameters, the ultrasonic oscillator will start working.

The role of solid state relays:
1. Control the working status of the actuator.
By Date：
Tag： ,
Subscribe to: Posts (Atom)

MGR-AH_3 Series Panel Mount Solid State Relay

  MGR-AH_3 Series Panel Mount Solid State Relay [All the information on this website is for reference only, and the actual product and the a...